The RM1240 can be supplied with a Form A (normally open), or Form C (changeover) contact. The switch has an M10 threaded brass/nickel plated body. The normally open contact is rated at 300Vac, 0.5A, 10VA, and the changeover contact at 200Vac, 0.5A, 5W. Both switches have a 300mm cable for easy termination. A magnet with the same size housing as the RM1240 switch can be supplied. This enables easy adjustment of both the switch and magnet. This switch is useful for a wide range of position sensing applications especially for control and process applications.